We encourage you to contact us with any questions or concerns.

Burke Library - 3rd Floor
helpdesk@hamilton.edu

859-4181
859-4185 - fax

Resource Center Home

Printer

A peripheral computing device which produces text or images of electronic documents on physical media such as paper or envelopes. Hamilton maintains approximately 150 "network printers" across campus in various departments and public labs.

Available Resources

:
Mac OS 10.4 Tiger
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.4 Tiger For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Mac OS 10.5 Leopard
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.5 Leopard For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.5 Leopard For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Mac OS 10.6 Snow Leopard
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.6 Snow Leopard For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.6 Snow Leopard For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Mac OS 10.7 Lion
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.7 Lion For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.7 Lion For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
PaperCut
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x PaperCut For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Printer
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Printer For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Printer For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Printing
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Printing For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Printing For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Wireless
  • ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Wireless For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername       username = Your Hamilton network username       password = Your Hamilton network password       printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server.  Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
  • Print Driver Installation for Mac OS X 10.4.x-10.8.x Wireless For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect.     Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Cupola