Resource Center - Mac OS 10.5 Leopard

Antivirus

Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Antivirus For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Antivirus Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.

Backup

Backup and Restore Files in Mac OS X Backup Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.

ESS

Backup and Restore Files in Mac OS X ESS Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.

Email

Configuring Apple Mail for HillConnect Mail Email For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).

External Hard Drive

Backup and Restore Files in Mac OS X External Hard Drive Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.

Hamilton Website

Web Publishing Using Mac OSX Hamilton Website OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

HillConnect

Configuring Apple Mail for HillConnect Mail HillConnect For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).

HillMail

Configuring Apple Mail for HillConnect Mail HillMail For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).

Install

Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Install For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.

Mac OS 10.4 Tiger

Backup and Restore Files in Mac OS X Mac OS 10.4 Tiger Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.
Burning a Disc Using Burn Folder in OSX Mac OS 10.4 Tiger
Creating a PDF in OS X Mac OS 10.4 Tiger Open the document in its native application. From the File menu, select Print. From the File menu, select Page Setup… The Page Setup window will pop up. Format for Any Printer and set Paper Size equal to the size of your document. Click OK. Click on the PDF… button in the lower left corner of the Print window, and select Save as PDF… Save window will pop up. After you name your file and choose where to save it, click Save.
Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Mac OS 10.4 Tiger For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.4 Tiger For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Mac OS 10.4 Tiger Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.
Using Remote Desktop in Mac OS X to Connect to Windows XP Mac OS 10.4 Tiger NOTE: These instructions are for connecting to Windows XP SP2 and 7 from Mac OS X 10.2.8 or later. NOTE: It is recommended that the Windows Firewall be active at all times on your office computer. To turn it on or confirm its status please follow the steps below. Click on Start, select Control Panel, then select Windows Firewall. (Windows 7) On the left taskbar, click on Turn Windows Firewall on or off Verify that there is a bullet in front of the option On (recommended) (in Windows XP) or Turn on Windows Firewall (in Windows 7) Windows XP (left) and Windows 7 (right) Configuring Windows Firewall to Allow a Remote Desktop Connection With the Windows Firewall window still open, complete the following steps: Click on the Exceptions tab. In Windows 7, click on Allow a program or feature through Windows Firewall. Place a check mark in the box in front of Remote Desktop. In Windows 7, scroll down to check that the Domain and Home/Work (Private) is checked for Remote Desktop (for Windows 7 users, complete this step and skip to the section Configuring your Office Computer for Remote Desktop Connection). Click on the Advanced tab. Click on Local Area Connection to highlight it. Click on the Settings button. Place a checkmark in the box labeled Remote Desktop. If a window labeled Service Settings appears, Click OK. Click OK on both the Advanced Settings and the Windows Firewall window. Configuring Your Office Computer for a Remote Desktop Connection Click on Start, right-click My Computer and choose Properties. Click on the Remote tab and place a checkmark in the Allow users to connect remotely to this computer box, as shown below. On Windows 7, click on Remote Settings and place a bullet next to Allow connections from computers running any version of Remote Desktop (less secure).　 Windows XP (left) and Windows 7 (right) Verify that you have the proper permission to connect to your computer by clicking Select Remote Users… or Select Users (Windows 7). Your domain and username should be listed as already having access (as shown below.) NOTE: If you do not already have access, click on the Add... button as shown above and a window similar to the one below will appear. In the space labeled Enter the object names to select (examples):, type your domain (the domain for employees is Hamilton-d) and user ID. For example, Hamilton-d\dhubbard. Click Check Names and, if it is a valid username, the domain name will disappear and your username will become underlined. For example, in the illustration below, hamilton-d\dhubbard will change to dhubbard. Click OK to close the Select Users window. Click OK to close the Remote Desktop Users window and click OK again to close the System Properties window. Click on Start and then click on Run… In the Open: field, type cmd and click OK. A box with a black background and white text will appear. Type ipconfig at the blinking cursor and press on your keyboard. Make note of the IP Address (as shown above,) you will need to take it with you to access your computer remotely. (NOTE: You should do this each time you plan to use Remote Desktop Access as IP addresses change periodically.) Close the window. To access your computer using Remote Desktop, your office computer must be on and connected to the Hamilton Network. You can log off of your computer and leave it turned on or you can lock your desktop while logged on. To lock your computer, press the , , and keys simultaneously, and then click on Lock Computer. This completes setting up your office computer. These settings will remain in effect and do not need to be repeated. Installing Remote Desktop Connection on Mac OS X On your OS X computer, go to Microsoft’s webpage for the Remote Desktop Connection Client for Mac OS X: http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-99BB-B664B27EE1F0#viewer Click on Download Now to download the file. If your browser asks you what to do with this file, tell it to save the file. If your browser automatically opens the file with Stuffit, skip to step 5. After the file finishes downloading, go to the location the file was downloaded to (most likely the desktop) and double-click the RDC_2.1.1_ALL.dmg file. You’ll now have a white volume on your desktop called RDC. Open this white volume if it isn’t already open. To install the application, double-click on the RDC Installer and follow the instructions to install the application onto your computer. You should now see the Remote Desktop Connection application on your dock. Connecting to Your Office Computer from a Remote OS X Computer Open the Remote Desktop Connection application. The first time you open the application, the End User License Agreement will pop up. Accept the license agreement. Then a window will pop up asking you to register. Click Register Later. You will not see these windows when you open the program in the future. In the Computer: field, type the IP address (from step 10 on page 4) for your office computer. Click Connect. In the Log On to Windows dialog box, type your network username, password, and domain and then click OK. You may be prompted with the below message. Click Connect. Once connected, go to the RDC menu and select Preferences. Click the Security icon and select Always connect, even if authentication fails. This will remove future message prompts like the one below. The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your office computer. Your office computer will remain locked and no one will be able to use it without a password, nor will anyone see the work you are doing on your office computer remotely. To improve performance, you will not see your usual desktop picture if you have one set up. To Log Off and End a Session In the Remote Desktop Session, click Start and select Disconnect. When it asks you if you are sure you want to disconnect, click Disconnect.
Web Publishing Using Mac OSX Mac OS 10.4 Tiger OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

Mac OS 10.5 Leopard

Backup and Restore Files in Mac OS X Mac OS 10.5 Leopard Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.
Burning a Disc Using Burn Folder in OSX Mac OS 10.5 Leopard
Configuring Apple Mail for HillConnect Mail Mac OS 10.5 Leopard For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).
Creating a PDF in OS X Mac OS 10.5 Leopard Open the document in its native application. From the File menu, select Print. From the File menu, select Page Setup… The Page Setup window will pop up. Format for Any Printer and set Paper Size equal to the size of your document. Click OK. Click on the PDF… button in the lower left corner of the Print window, and select Save as PDF… Save window will pop up. After you name your file and choose where to save it, click Save.
Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Mac OS 10.5 Leopard For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.5 Leopard For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Network Printer Installation on Mac OS X 10.5.x-10.7.x for Employees Mac OS 10.5 Leopard Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.6.x. To verify that you are running Mac OS X 10.5.x – 10.6.x click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.6.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. If your computer is running 10.5.x – 10.6.x, close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. In System Preferences click on Print & Fax. In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. The Printer Browser will open. Select IP tab the top and configure the following: Protocol: Line Printer Daemon - LPD Address: printx Queue: Add Printer Name – The printer name is comprised building name, room number and number of printers in the room (listed alphabetically.) e.g. KJ-217-A Name: Same as Queue Location: Leave blank. Print Using: This should automatically select the correct printer model for your printer. If it does not, Select Select a driver to use… from the drop-down list beside Print Using and then the appropriate model from the next list. Once all of those settings are configured, Click Add. You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. Installing the PaperCut Client The PaperCut client should be already installed on your Hamilton barcoded computer. However, if you need to reinstall the PaperCut Client on your Hamilton computer please continue, otherwise go to page 8 to Using the PaperCut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. In the window that appears, enter your network username and password. Click Connect. Click on Yes to install the PaperCut Client into your applications folder. Enter your network username and password. Click OK. You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. From the Apple Menu, select System Preferences. Click on Accounts. Click on Login Items. Click on the . Navigate to Applications then PCClient. Click Add. Close the Accounts Window. You are ready to print. Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. You’ll see the “cost” of your print job. Click on Print. At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. If you want to see more details, click on Details… Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact.
Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.5 Leopard For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Secure Wireless - Mac OS 10.5 & 10.6 Mac OS 10.5 Leopard For Macintosh Laptops Only NOTE: If you are not on the Hamilton campus please go through the step-by-step instructions until you come to the stop sign. Then when you arrive on campus you can complete the last few step to connect to our secure wireless network. If you are on campus please proceed through all the instructions in the document. Configuration System Preferences Click on the Apple menu icon in the upper-left corner of the screen and open System Preferences. Click on the Network icon near the middle of the window. Click on the button in the lower left of the screen and click on Set Service Order. Click and drag AirPort to the top of the Service Order list. Click OK and then Apply. In the left column, click on Airport. Click on Advanced. Select 802.1x in the menu row. Click on the button in the bottom left corner and click Add User Profile to create a new profile. Name the profile Hamilton Secure. In the box labeled User Name: type your network ID (this is the same as your e-mail name (without @hamilton.edu). In the box labeled Password: type in your network password (this is usually the same as your e-mail password). In the box labeled Authentication: check the box to enable PEAP and UNCHECK TTLS In the box labeled Wireless Network: type aps-hamilton. In the box labeled Security Type: select WPA2 Enterprise 5. Select TCP/IP in the menu row. For Configure IPv6, select Off. Click OK and then Apply. If AirPort is not already on, click the Turn AirPort On button. Under Location, click on Automatic and select Edit Locations. NOTE: If your preference is locked (see the lock icon in the lower left corner), you must unlock it by clicking on it. The ID and password it requests are those that you enter when your first boot your computer. Click the plus ( )to create a new location and call it Hamilton. Then click Done. Under Location make sure it says Hamilton otherwise click the location and select Hamilton. Click Advanced. IMPORTANT NOTE: When using the location feature you will need to be mindful of your physical location. When you are at Hamilton College please use the location called Hamilton; otherwise, revert back to Automatic when physically off-campus with your laptop. Select Airport in the menu row. Click on the icon to add a new Preferred Network. Type in the Network Name: aps-hamilton. In the option labeled Security: select WPA2 Enterprise. Type in your Hamilton Network user name & password in the appropriate fields. This is the user ID and password you use to access your ESS or SSS folders. It is often the same as your e-mail ID and password. Select Hamilton Secure in 802.1x. Click Add. If you have more than one network listed in your Preferred Networks, click and drag aps-hamilton to the top of the Preferred Networks list. Click OK. Click Apply. Close System Preferences. NOTE: If you are pre-configuring your laptop at home for the Hamilton wireless network please stop here, otherwise you can continue to step 13. When you arrive on campus turn on your computer and it will automatically attempt to connect to aps-hamilton (provided Airport is on). You should then be prompted to verify the security certificate for our secure network as shown below (starting with step 13). In the event you cannot connect to our wireless network while on campus, please contact the Help Desk for assistance at 315-859-4181. If you are on campus, you should see a prompt to verify your Certificate. Please click on Show Certificate. Check Always trust “acs-07.hamilton.edu”. Click Continue. Type your computer password if/when prompted. This is the password you normally enter when you first boot your computer. You are now connected to the secure wireless network.
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Mac OS 10.5 Leopard Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.
Using Remote Desktop in Mac OS X to Connect to Windows XP Mac OS 10.5 Leopard NOTE: These instructions are for connecting to Windows XP SP2 and 7 from Mac OS X 10.2.8 or later. NOTE: It is recommended that the Windows Firewall be active at all times on your office computer. To turn it on or confirm its status please follow the steps below. Click on Start, select Control Panel, then select Windows Firewall. (Windows 7) On the left taskbar, click on Turn Windows Firewall on or off Verify that there is a bullet in front of the option On (recommended) (in Windows XP) or Turn on Windows Firewall (in Windows 7) Windows XP (left) and Windows 7 (right) Configuring Windows Firewall to Allow a Remote Desktop Connection With the Windows Firewall window still open, complete the following steps: Click on the Exceptions tab. In Windows 7, click on Allow a program or feature through Windows Firewall. Place a check mark in the box in front of Remote Desktop. In Windows 7, scroll down to check that the Domain and Home/Work (Private) is checked for Remote Desktop (for Windows 7 users, complete this step and skip to the section Configuring your Office Computer for Remote Desktop Connection). Click on the Advanced tab. Click on Local Area Connection to highlight it. Click on the Settings button. Place a checkmark in the box labeled Remote Desktop. If a window labeled Service Settings appears, Click OK. Click OK on both the Advanced Settings and the Windows Firewall window. Configuring Your Office Computer for a Remote Desktop Connection Click on Start, right-click My Computer and choose Properties. Click on the Remote tab and place a checkmark in the Allow users to connect remotely to this computer box, as shown below. On Windows 7, click on Remote Settings and place a bullet next to Allow connections from computers running any version of Remote Desktop (less secure).　 Windows XP (left) and Windows 7 (right) Verify that you have the proper permission to connect to your computer by clicking Select Remote Users… or Select Users (Windows 7). Your domain and username should be listed as already having access (as shown below.) NOTE: If you do not already have access, click on the Add... button as shown above and a window similar to the one below will appear. In the space labeled Enter the object names to select (examples):, type your domain (the domain for employees is Hamilton-d) and user ID. For example, Hamilton-d\dhubbard. Click Check Names and, if it is a valid username, the domain name will disappear and your username will become underlined. For example, in the illustration below, hamilton-d\dhubbard will change to dhubbard. Click OK to close the Select Users window. Click OK to close the Remote Desktop Users window and click OK again to close the System Properties window. Click on Start and then click on Run… In the Open: field, type cmd and click OK. A box with a black background and white text will appear. Type ipconfig at the blinking cursor and press on your keyboard. Make note of the IP Address (as shown above,) you will need to take it with you to access your computer remotely. (NOTE: You should do this each time you plan to use Remote Desktop Access as IP addresses change periodically.) Close the window. To access your computer using Remote Desktop, your office computer must be on and connected to the Hamilton Network. You can log off of your computer and leave it turned on or you can lock your desktop while logged on. To lock your computer, press the , , and keys simultaneously, and then click on Lock Computer. This completes setting up your office computer. These settings will remain in effect and do not need to be repeated. Installing Remote Desktop Connection on Mac OS X On your OS X computer, go to Microsoft’s webpage for the Remote Desktop Connection Client for Mac OS X: http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-99BB-B664B27EE1F0#viewer Click on Download Now to download the file. If your browser asks you what to do with this file, tell it to save the file. If your browser automatically opens the file with Stuffit, skip to step 5. After the file finishes downloading, go to the location the file was downloaded to (most likely the desktop) and double-click the RDC_2.1.1_ALL.dmg file. You’ll now have a white volume on your desktop called RDC. Open this white volume if it isn’t already open. To install the application, double-click on the RDC Installer and follow the instructions to install the application onto your computer. You should now see the Remote Desktop Connection application on your dock. Connecting to Your Office Computer from a Remote OS X Computer Open the Remote Desktop Connection application. The first time you open the application, the End User License Agreement will pop up. Accept the license agreement. Then a window will pop up asking you to register. Click Register Later. You will not see these windows when you open the program in the future. In the Computer: field, type the IP address (from step 10 on page 4) for your office computer. Click Connect. In the Log On to Windows dialog box, type your network username, password, and domain and then click OK. You may be prompted with the below message. Click Connect. Once connected, go to the RDC menu and select Preferences. Click the Security icon and select Always connect, even if authentication fails. This will remove future message prompts like the one below. The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your office computer. Your office computer will remain locked and no one will be able to use it without a password, nor will anyone see the work you are doing on your office computer remotely. To improve performance, you will not see your usual desktop picture if you have one set up. To Log Off and End a Session In the Remote Desktop Session, click Start and select Disconnect. When it asks you if you are sure you want to disconnect, click Disconnect.
Web Publishing Using Mac OSX Mac OS 10.5 Leopard OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

Mac OS 10.6 Snow Leopard

Backup and Restore Files in Mac OS X Mac OS 10.6 Snow Leopard Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.
Burning a Disc Using Burn Folder in OSX Mac OS 10.6 Snow Leopard
Configuring Apple Mail for HillConnect Mail Mac OS 10.6 Snow Leopard For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).
Creating a PDF in OS X Mac OS 10.6 Snow Leopard Open the document in its native application. From the File menu, select Print. From the File menu, select Page Setup… The Page Setup window will pop up. Format for Any Printer and set Paper Size equal to the size of your document. Click OK. Click on the PDF… button in the lower left corner of the Print window, and select Save as PDF… Save window will pop up. After you name your file and choose where to save it, click Save.
Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Mac OS 10.6 Snow Leopard For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.6 Snow Leopard For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Network Printer Installation on Mac OS X 10.5.x-10.7.x for Employees Mac OS 10.6 Snow Leopard Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.6.x. To verify that you are running Mac OS X 10.5.x – 10.6.x click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.6.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. If your computer is running 10.5.x – 10.6.x, close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. In System Preferences click on Print & Fax. In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. The Printer Browser will open. Select IP tab the top and configure the following: Protocol: Line Printer Daemon - LPD Address: printx Queue: Add Printer Name – The printer name is comprised building name, room number and number of printers in the room (listed alphabetically.) e.g. KJ-217-A Name: Same as Queue Location: Leave blank. Print Using: This should automatically select the correct printer model for your printer. If it does not, Select Select a driver to use… from the drop-down list beside Print Using and then the appropriate model from the next list. Once all of those settings are configured, Click Add. You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. Installing the PaperCut Client The PaperCut client should be already installed on your Hamilton barcoded computer. However, if you need to reinstall the PaperCut Client on your Hamilton computer please continue, otherwise go to page 8 to Using the PaperCut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. In the window that appears, enter your network username and password. Click Connect. Click on Yes to install the PaperCut Client into your applications folder. Enter your network username and password. Click OK. You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. From the Apple Menu, select System Preferences. Click on Accounts. Click on Login Items. Click on the . Navigate to Applications then PCClient. Click Add. Close the Accounts Window. You are ready to print. Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. You’ll see the “cost” of your print job. Click on Print. At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. If you want to see more details, click on Details… Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact.
Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.6 Snow Leopard For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Secure Wireless - Mac OS 10.5 & 10.6 Mac OS 10.6 Snow Leopard For Macintosh Laptops Only NOTE: If you are not on the Hamilton campus please go through the step-by-step instructions until you come to the stop sign. Then when you arrive on campus you can complete the last few step to connect to our secure wireless network. If you are on campus please proceed through all the instructions in the document. Configuration System Preferences Click on the Apple menu icon in the upper-left corner of the screen and open System Preferences. Click on the Network icon near the middle of the window. Click on the button in the lower left of the screen and click on Set Service Order. Click and drag AirPort to the top of the Service Order list. Click OK and then Apply. In the left column, click on Airport. Click on Advanced. Select 802.1x in the menu row. Click on the button in the bottom left corner and click Add User Profile to create a new profile. Name the profile Hamilton Secure. In the box labeled User Name: type your network ID (this is the same as your e-mail name (without @hamilton.edu). In the box labeled Password: type in your network password (this is usually the same as your e-mail password). In the box labeled Authentication: check the box to enable PEAP and UNCHECK TTLS In the box labeled Wireless Network: type aps-hamilton. In the box labeled Security Type: select WPA2 Enterprise 5. Select TCP/IP in the menu row. For Configure IPv6, select Off. Click OK and then Apply. If AirPort is not already on, click the Turn AirPort On button. Under Location, click on Automatic and select Edit Locations. NOTE: If your preference is locked (see the lock icon in the lower left corner), you must unlock it by clicking on it. The ID and password it requests are those that you enter when your first boot your computer. Click the plus ( )to create a new location and call it Hamilton. Then click Done. Under Location make sure it says Hamilton otherwise click the location and select Hamilton. Click Advanced. IMPORTANT NOTE: When using the location feature you will need to be mindful of your physical location. When you are at Hamilton College please use the location called Hamilton; otherwise, revert back to Automatic when physically off-campus with your laptop. Select Airport in the menu row. Click on the icon to add a new Preferred Network. Type in the Network Name: aps-hamilton. In the option labeled Security: select WPA2 Enterprise. Type in your Hamilton Network user name & password in the appropriate fields. This is the user ID and password you use to access your ESS or SSS folders. It is often the same as your e-mail ID and password. Select Hamilton Secure in 802.1x. Click Add. If you have more than one network listed in your Preferred Networks, click and drag aps-hamilton to the top of the Preferred Networks list. Click OK. Click Apply. Close System Preferences. NOTE: If you are pre-configuring your laptop at home for the Hamilton wireless network please stop here, otherwise you can continue to step 13. When you arrive on campus turn on your computer and it will automatically attempt to connect to aps-hamilton (provided Airport is on). You should then be prompted to verify the security certificate for our secure network as shown below (starting with step 13). In the event you cannot connect to our wireless network while on campus, please contact the Help Desk for assistance at 315-859-4181. If you are on campus, you should see a prompt to verify your Certificate. Please click on Show Certificate. Check Always trust “acs-07.hamilton.edu”. Click Continue. Type your computer password if/when prompted. This is the password you normally enter when you first boot your computer. You are now connected to the secure wireless network.
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Mac OS 10.6 Snow Leopard Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.
Using Remote Desktop in Mac OS X to Connect to Windows XP Mac OS 10.6 Snow Leopard NOTE: These instructions are for connecting to Windows XP SP2 and 7 from Mac OS X 10.2.8 or later. NOTE: It is recommended that the Windows Firewall be active at all times on your office computer. To turn it on or confirm its status please follow the steps below. Click on Start, select Control Panel, then select Windows Firewall. (Windows 7) On the left taskbar, click on Turn Windows Firewall on or off Verify that there is a bullet in front of the option On (recommended) (in Windows XP) or Turn on Windows Firewall (in Windows 7) Windows XP (left) and Windows 7 (right) Configuring Windows Firewall to Allow a Remote Desktop Connection With the Windows Firewall window still open, complete the following steps: Click on the Exceptions tab. In Windows 7, click on Allow a program or feature through Windows Firewall. Place a check mark in the box in front of Remote Desktop. In Windows 7, scroll down to check that the Domain and Home/Work (Private) is checked for Remote Desktop (for Windows 7 users, complete this step and skip to the section Configuring your Office Computer for Remote Desktop Connection). Click on the Advanced tab. Click on Local Area Connection to highlight it. Click on the Settings button. Place a checkmark in the box labeled Remote Desktop. If a window labeled Service Settings appears, Click OK. Click OK on both the Advanced Settings and the Windows Firewall window. Configuring Your Office Computer for a Remote Desktop Connection Click on Start, right-click My Computer and choose Properties. Click on the Remote tab and place a checkmark in the Allow users to connect remotely to this computer box, as shown below. On Windows 7, click on Remote Settings and place a bullet next to Allow connections from computers running any version of Remote Desktop (less secure).　 Windows XP (left) and Windows 7 (right) Verify that you have the proper permission to connect to your computer by clicking Select Remote Users… or Select Users (Windows 7). Your domain and username should be listed as already having access (as shown below.) NOTE: If you do not already have access, click on the Add... button as shown above and a window similar to the one below will appear. In the space labeled Enter the object names to select (examples):, type your domain (the domain for employees is Hamilton-d) and user ID. For example, Hamilton-d\dhubbard. Click Check Names and, if it is a valid username, the domain name will disappear and your username will become underlined. For example, in the illustration below, hamilton-d\dhubbard will change to dhubbard. Click OK to close the Select Users window. Click OK to close the Remote Desktop Users window and click OK again to close the System Properties window. Click on Start and then click on Run… In the Open: field, type cmd and click OK. A box with a black background and white text will appear. Type ipconfig at the blinking cursor and press on your keyboard. Make note of the IP Address (as shown above,) you will need to take it with you to access your computer remotely. (NOTE: You should do this each time you plan to use Remote Desktop Access as IP addresses change periodically.) Close the window. To access your computer using Remote Desktop, your office computer must be on and connected to the Hamilton Network. You can log off of your computer and leave it turned on or you can lock your desktop while logged on. To lock your computer, press the , , and keys simultaneously, and then click on Lock Computer. This completes setting up your office computer. These settings will remain in effect and do not need to be repeated. Installing Remote Desktop Connection on Mac OS X On your OS X computer, go to Microsoft’s webpage for the Remote Desktop Connection Client for Mac OS X: http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-99BB-B664B27EE1F0#viewer Click on Download Now to download the file. If your browser asks you what to do with this file, tell it to save the file. If your browser automatically opens the file with Stuffit, skip to step 5. After the file finishes downloading, go to the location the file was downloaded to (most likely the desktop) and double-click the RDC_2.1.1_ALL.dmg file. You’ll now have a white volume on your desktop called RDC. Open this white volume if it isn’t already open. To install the application, double-click on the RDC Installer and follow the instructions to install the application onto your computer. You should now see the Remote Desktop Connection application on your dock. Connecting to Your Office Computer from a Remote OS X Computer Open the Remote Desktop Connection application. The first time you open the application, the End User License Agreement will pop up. Accept the license agreement. Then a window will pop up asking you to register. Click Register Later. You will not see these windows when you open the program in the future. In the Computer: field, type the IP address (from step 10 on page 4) for your office computer. Click Connect. In the Log On to Windows dialog box, type your network username, password, and domain and then click OK. You may be prompted with the below message. Click Connect. Once connected, go to the RDC menu and select Preferences. Click the Security icon and select Always connect, even if authentication fails. This will remove future message prompts like the one below. The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your office computer. Your office computer will remain locked and no one will be able to use it without a password, nor will anyone see the work you are doing on your office computer remotely. To improve performance, you will not see your usual desktop picture if you have one set up. To Log Off and End a Session In the Remote Desktop Session, click Start and select Disconnect. When it asks you if you are sure you want to disconnect, click Disconnect.
Web Publishing Using Mac OSX Mac OS 10.6 Snow Leopard OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

Mac OS 10.7 Lion

Burning a Disc Using Burn Folder in OSX Mac OS 10.7 Lion
Creating a PDF in OS X Mac OS 10.7 Lion Open the document in its native application. From the File menu, select Print. From the File menu, select Page Setup… The Page Setup window will pop up. Format for Any Printer and set Paper Size equal to the size of your document. Click OK. Click on the PDF… button in the lower left corner of the Print window, and select Save as PDF… Save window will pop up. After you name your file and choose where to save it, click Save.
Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Mac OS 10.7 Lion For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Mac OS 10.7 Lion For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Print Driver Installation for Mac OS X 10.4.x-10.8.x Mac OS 10.7 Lion For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Mac OS 10.7 Lion Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.
Using Remote Desktop in Mac OS X to Connect to Windows XP Mac OS 10.7 Lion NOTE: These instructions are for connecting to Windows XP SP2 and 7 from Mac OS X 10.2.8 or later. NOTE: It is recommended that the Windows Firewall be active at all times on your office computer. To turn it on or confirm its status please follow the steps below. Click on Start, select Control Panel, then select Windows Firewall. (Windows 7) On the left taskbar, click on Turn Windows Firewall on or off Verify that there is a bullet in front of the option On (recommended) (in Windows XP) or Turn on Windows Firewall (in Windows 7) Windows XP (left) and Windows 7 (right) Configuring Windows Firewall to Allow a Remote Desktop Connection With the Windows Firewall window still open, complete the following steps: Click on the Exceptions tab. In Windows 7, click on Allow a program or feature through Windows Firewall. Place a check mark in the box in front of Remote Desktop. In Windows 7, scroll down to check that the Domain and Home/Work (Private) is checked for Remote Desktop (for Windows 7 users, complete this step and skip to the section Configuring your Office Computer for Remote Desktop Connection). Click on the Advanced tab. Click on Local Area Connection to highlight it. Click on the Settings button. Place a checkmark in the box labeled Remote Desktop. If a window labeled Service Settings appears, Click OK. Click OK on both the Advanced Settings and the Windows Firewall window. Configuring Your Office Computer for a Remote Desktop Connection Click on Start, right-click My Computer and choose Properties. Click on the Remote tab and place a checkmark in the Allow users to connect remotely to this computer box, as shown below. On Windows 7, click on Remote Settings and place a bullet next to Allow connections from computers running any version of Remote Desktop (less secure).　 Windows XP (left) and Windows 7 (right) Verify that you have the proper permission to connect to your computer by clicking Select Remote Users… or Select Users (Windows 7). Your domain and username should be listed as already having access (as shown below.) NOTE: If you do not already have access, click on the Add... button as shown above and a window similar to the one below will appear. In the space labeled Enter the object names to select (examples):, type your domain (the domain for employees is Hamilton-d) and user ID. For example, Hamilton-d\dhubbard. Click Check Names and, if it is a valid username, the domain name will disappear and your username will become underlined. For example, in the illustration below, hamilton-d\dhubbard will change to dhubbard. Click OK to close the Select Users window. Click OK to close the Remote Desktop Users window and click OK again to close the System Properties window. Click on Start and then click on Run… In the Open: field, type cmd and click OK. A box with a black background and white text will appear. Type ipconfig at the blinking cursor and press on your keyboard. Make note of the IP Address (as shown above,) you will need to take it with you to access your computer remotely. (NOTE: You should do this each time you plan to use Remote Desktop Access as IP addresses change periodically.) Close the window. To access your computer using Remote Desktop, your office computer must be on and connected to the Hamilton Network. You can log off of your computer and leave it turned on or you can lock your desktop while logged on. To lock your computer, press the , , and keys simultaneously, and then click on Lock Computer. This completes setting up your office computer. These settings will remain in effect and do not need to be repeated. Installing Remote Desktop Connection on Mac OS X On your OS X computer, go to Microsoft’s webpage for the Remote Desktop Connection Client for Mac OS X: http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-99BB-B664B27EE1F0#viewer Click on Download Now to download the file. If your browser asks you what to do with this file, tell it to save the file. If your browser automatically opens the file with Stuffit, skip to step 5. After the file finishes downloading, go to the location the file was downloaded to (most likely the desktop) and double-click the RDC_2.1.1_ALL.dmg file. You’ll now have a white volume on your desktop called RDC. Open this white volume if it isn’t already open. To install the application, double-click on the RDC Installer and follow the instructions to install the application onto your computer. You should now see the Remote Desktop Connection application on your dock. Connecting to Your Office Computer from a Remote OS X Computer Open the Remote Desktop Connection application. The first time you open the application, the End User License Agreement will pop up. Accept the license agreement. Then a window will pop up asking you to register. Click Register Later. You will not see these windows when you open the program in the future. In the Computer: field, type the IP address (from step 10 on page 4) for your office computer. Click Connect. In the Log On to Windows dialog box, type your network username, password, and domain and then click OK. You may be prompted with the below message. Click Connect. Once connected, go to the RDC menu and select Preferences. Click the Security icon and select Always connect, even if authentication fails. This will remove future message prompts like the one below. The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your office computer. Your office computer will remain locked and no one will be able to use it without a password, nor will anyone see the work you are doing on your office computer remotely. To improve performance, you will not see your usual desktop picture if you have one set up. To Log Off and End a Session In the Remote Desktop Session, click Start and select Disconnect. When it asks you if you are sure you want to disconnect, click Disconnect.
Web Publishing Using Mac OSX Mac OS 10.7 Lion OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

PDF

Creating a PDF in OS X PDF Open the document in its native application. From the File menu, select Print. From the File menu, select Page Setup… The Page Setup window will pop up. Format for Any Printer and set Paper Size equal to the size of your document. Click OK. Click on the PDF… button in the lower left corner of the Print window, and select Save as PDF… Save window will pop up. After you name your file and choose where to save it, click Save.

PaperCut

ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x PaperCut For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Network Printer Installation on Mac OS X 10.5.x-10.7.x for Employees PaperCut Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.6.x. To verify that you are running Mac OS X 10.5.x – 10.6.x click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.6.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. If your computer is running 10.5.x – 10.6.x, close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. In System Preferences click on Print & Fax. In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. The Printer Browser will open. Select IP tab the top and configure the following: Protocol: Line Printer Daemon - LPD Address: printx Queue: Add Printer Name – The printer name is comprised building name, room number and number of printers in the room (listed alphabetically.) e.g. KJ-217-A Name: Same as Queue Location: Leave blank. Print Using: This should automatically select the correct printer model for your printer. If it does not, Select Select a driver to use… from the drop-down list beside Print Using and then the appropriate model from the next list. Once all of those settings are configured, Click Add. You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. Installing the PaperCut Client The PaperCut client should be already installed on your Hamilton barcoded computer. However, if you need to reinstall the PaperCut Client on your Hamilton computer please continue, otherwise go to page 8 to Using the PaperCut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. In the window that appears, enter your network username and password. Click Connect. Click on Yes to install the PaperCut Client into your applications folder. Enter your network username and password. Click OK. You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. From the Apple Menu, select System Preferences. Click on Accounts. Click on Login Items. Click on the . Navigate to Applications then PCClient. Click Add. Close the Accounts Window. You are ready to print. Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. You’ll see the “cost” of your print job. Click on Print. At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. If you want to see more details, click on Details… Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact.

Personal Web Space

Web Publishing Using Mac OSX Personal Web Space OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

Printer

ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Printer For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Print Driver Installation for Mac OS X 10.4.x-10.8.x Printer For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x

Printing

ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Printing For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Network Printer Installation on Mac OS X 10.5.x-10.7.x for Employees Printing Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.6.x. To verify that you are running Mac OS X 10.5.x – 10.6.x click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.6.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. If your computer is running 10.5.x – 10.6.x, close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. In System Preferences click on Print & Fax. In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. The Printer Browser will open. Select IP tab the top and configure the following: Protocol: Line Printer Daemon - LPD Address: printx Queue: Add Printer Name – The printer name is comprised building name, room number and number of printers in the room (listed alphabetically.) e.g. KJ-217-A Name: Same as Queue Location: Leave blank. Print Using: This should automatically select the correct printer model for your printer. If it does not, Select Select a driver to use… from the drop-down list beside Print Using and then the appropriate model from the next list. Once all of those settings are configured, Click Add. You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. Installing the PaperCut Client The PaperCut client should be already installed on your Hamilton barcoded computer. However, if you need to reinstall the PaperCut Client on your Hamilton computer please continue, otherwise go to page 8 to Using the PaperCut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. In the window that appears, enter your network username and password. Click Connect. Click on Yes to install the PaperCut Client into your applications folder. Enter your network username and password. Click OK. You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. From the Apple Menu, select System Preferences. Click on Accounts. Click on Login Items. Click on the . Navigate to Applications then PCClient. Click Add. Close the Accounts Window. You are ready to print. Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. You’ll see the “cost” of your print job. Click on Print. At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. If you want to see more details, click on Details… Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact.
Print Driver Installation for Mac OS X 10.4.x-10.8.x Printing For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x

Remote Access

Using Remote Desktop in Mac OS X to Connect to Windows XP Remote Access NOTE: These instructions are for connecting to Windows XP SP2 and 7 from Mac OS X 10.2.8 or later. NOTE: It is recommended that the Windows Firewall be active at all times on your office computer. To turn it on or confirm its status please follow the steps below. Click on Start, select Control Panel, then select Windows Firewall. (Windows 7) On the left taskbar, click on Turn Windows Firewall on or off Verify that there is a bullet in front of the option On (recommended) (in Windows XP) or Turn on Windows Firewall (in Windows 7) Windows XP (left) and Windows 7 (right) Configuring Windows Firewall to Allow a Remote Desktop Connection With the Windows Firewall window still open, complete the following steps: Click on the Exceptions tab. In Windows 7, click on Allow a program or feature through Windows Firewall. Place a check mark in the box in front of Remote Desktop. In Windows 7, scroll down to check that the Domain and Home/Work (Private) is checked for Remote Desktop (for Windows 7 users, complete this step and skip to the section Configuring your Office Computer for Remote Desktop Connection). Click on the Advanced tab. Click on Local Area Connection to highlight it. Click on the Settings button. Place a checkmark in the box labeled Remote Desktop. If a window labeled Service Settings appears, Click OK. Click OK on both the Advanced Settings and the Windows Firewall window. Configuring Your Office Computer for a Remote Desktop Connection Click on Start, right-click My Computer and choose Properties. Click on the Remote tab and place a checkmark in the Allow users to connect remotely to this computer box, as shown below. On Windows 7, click on Remote Settings and place a bullet next to Allow connections from computers running any version of Remote Desktop (less secure).　 Windows XP (left) and Windows 7 (right) Verify that you have the proper permission to connect to your computer by clicking Select Remote Users… or Select Users (Windows 7). Your domain and username should be listed as already having access (as shown below.) NOTE: If you do not already have access, click on the Add... button as shown above and a window similar to the one below will appear. In the space labeled Enter the object names to select (examples):, type your domain (the domain for employees is Hamilton-d) and user ID. For example, Hamilton-d\dhubbard. Click Check Names and, if it is a valid username, the domain name will disappear and your username will become underlined. For example, in the illustration below, hamilton-d\dhubbard will change to dhubbard. Click OK to close the Select Users window. Click OK to close the Remote Desktop Users window and click OK again to close the System Properties window. Click on Start and then click on Run… In the Open: field, type cmd and click OK. A box with a black background and white text will appear. Type ipconfig at the blinking cursor and press on your keyboard. Make note of the IP Address (as shown above,) you will need to take it with you to access your computer remotely. (NOTE: You should do this each time you plan to use Remote Desktop Access as IP addresses change periodically.) Close the window. To access your computer using Remote Desktop, your office computer must be on and connected to the Hamilton Network. You can log off of your computer and leave it turned on or you can lock your desktop while logged on. To lock your computer, press the , , and keys simultaneously, and then click on Lock Computer. This completes setting up your office computer. These settings will remain in effect and do not need to be repeated. Installing Remote Desktop Connection on Mac OS X On your OS X computer, go to Microsoft’s webpage for the Remote Desktop Connection Client for Mac OS X: http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-99BB-B664B27EE1F0#viewer Click on Download Now to download the file. If your browser asks you what to do with this file, tell it to save the file. If your browser automatically opens the file with Stuffit, skip to step 5. After the file finishes downloading, go to the location the file was downloaded to (most likely the desktop) and double-click the RDC_2.1.1_ALL.dmg file. You’ll now have a white volume on your desktop called RDC. Open this white volume if it isn’t already open. To install the application, double-click on the RDC Installer and follow the instructions to install the application onto your computer. You should now see the Remote Desktop Connection application on your dock. Connecting to Your Office Computer from a Remote OS X Computer Open the Remote Desktop Connection application. The first time you open the application, the End User License Agreement will pop up. Accept the license agreement. Then a window will pop up asking you to register. Click Register Later. You will not see these windows when you open the program in the future. In the Computer: field, type the IP address (from step 10 on page 4) for your office computer. Click Connect. In the Log On to Windows dialog box, type your network username, password, and domain and then click OK. You may be prompted with the below message. Click Connect. Once connected, go to the RDC menu and select Preferences. Click the Security icon and select Always connect, even if authentication fails. This will remove future message prompts like the one below. The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on your office computer. Your office computer will remain locked and no one will be able to use it without a password, nor will anyone see the work you are doing on your office computer remotely. To improve performance, you will not see your usual desktop picture if you have one set up. To Log Off and End a Session In the Remote Desktop Session, click Start and select Disconnect. When it asks you if you are sure you want to disconnect, click Disconnect.

SSS

Backup and Restore Files in Mac OS X SSS Employees There are two ways to back up your files on your MAC without purchasing commercial software. Manual Backup In order to manually backup your folders all you have to do is click and drag the desired folder(s) from your MAC to your personal folder on the ESS server. *****DO NOT BACK UP YOUR ENTIRE HARD DRIVE***** You will have to do this periodically on your own and whatever you save to the server will be the only files backed up. Example of backing up your local Documents folder to your ESS folder First, ensure that you are connected to your EES folder. Open up your Macintosh hard drive and click on the documents folder or you can click on the icon with your username and then click on the documents folder. You can also select the Users folder. In Users, select your user name’s folder (e.g. “jsmith”). In your user name’s folder, locate the Documents folder. NOTE: The Documents icon on the left side of the screen is only a shortcut; if you click and drag that icon, you will remove the Documents shortcut, not back up your files. Open your Macintosh hard drive again by double-clicking the desktop icon. This will create a second window. Click on the ESS “Users” icon and locate your folder (the list is alphabetical). Drag Documents from the first window to your folder in the EES window. If you have already saved the local folder to your ESS folder before then you will see the following prompt. Click Replace. If this is the first time saving the folder then it will automatically begin saving. After you click Replace it will begin saving the folder to your ESS folder. You should now be able to see your Documents folder on your ESS share. Your files in the Documents folder are now successfully backed up on your ESS share. Create Archive Files and folders can also be compressed within OSX, and then the resulting file (with a .zip extension) can be copied to the server for back up. A folder or file that is compressed usually results in a smaller file size. In the example shown below, the original folder is 104.2MB and the resulting ZIP file is 65.7MB. Select the file(s) or folder. From the File Menu choose Create Archive. If multiple files or folders are selected, a file will be created named Archive.Zip. If a single file or folder is selected, a file will be created named Foldername or filename.zip. Unarchiving a Zip file In order to make edits to any file contained within a zip file, you must first unarchive it. Double click on the zip file. If a folder was compressed, after double clicking on a zip file, a folder will appear in the same location as the zip file. If a single file was compressed, the original document will appear. The zip file will remain until you delete it.

Software

Configuring Apple Mail for HillConnect Mail Software For Mac OSX 10.5.x & 10.6.x only These instructions detail how to configure your e-mail client, Apple Mail to access Hamilton’s HillMail email system (powered by Google).
Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Software For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Software Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.

Sophos

Installing Sophos Anti-Virus on Mac OS 10.4-10.8 for Employees Sophos For Off Campus Use Removal of old Sophos (if necessary) NOTE: If you already have Sophos on your computer go through the removal steps otherwise go to the section Downloading and Installing Sophos 1. At Finder click on your hard drive icon. 2. Open the folder Library. 3. Open the folder Application Support. 4. Open the folder Sophos Anti-virus. 5. Launch the Remove Sophos Anti-virus. 6. Once Sophos is removed from the computer you can install the new version of Sophos. Downloading and Installing Sophos 1. Launch Firefox. NOTE: Safari will not work to download Sophos. 2. Please replace userid with your hamilton user name as you type in the Address line ftp://hamilton-d\userid@software.hamilton.edu/sophos 3. In the dialog box that appears type in your Hamilton Network password. 4. Click OK. 5. Click on the folder link Sophos Mac OS 10.2 & above. 6. Click on the link ESCOSX.zip to download the Sophos installer on your computer. 7. In the dialog box that appears, choose the bullet in front of Save File. 8. Click OK. 9. Locate the ESCOSX.zip that you downloaded. 10. Double click on the ESCOSX.zip to unpack the file folder. Installing Sophos 1. Close all other applications. 2. Open the folder ESCOSX file folder on the desktop. 3. Double-click on the file Sophos Anti-Virus.mpkg. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 4. Click Continue in window This package contains a program that … 5. The Welcome to the Sophos Anti-Virus Installer screen appears. Click Continue. 6. The Important Information screen appears. Click Continue. 7. The Select a Destination screen appears. Select your computer’s hard drive. Click Continue. 8. The Standard Install screen appears. Click Install. a. If the installer launches an Authenticate window, enter your username and password. This will be the username and password you use to log onto the computer. 9. When the progress bar is complete, you will see a message indicating Install Succeeded. Click Close. Configuring Sophos 1. Click on the Sophos Shield located by the Time & Date in the top right corner on the menu bar. 2. Select Open Sophos Anti-virus Preferences. 3. Click on the Lock button labeled Click lock to make changes in the lower left hand corner. 4. An Authenticate window appears. Enter your username and password. This will be the username and password you use to log onto the computer when it boots up. After typing them in click OK. 5. Click on the AutoUpdate tab (see figure below.) 6. On the Update from primary location select Company web server. 7. In the URL: field http://sophosupdate.hamilton.edu/cids/s000/escosx 8. In the User name: field, using your network username in place of “userid,” enter Hamilton-d\userid if you are an employee. For example, if you were a employee named Ulysses Grant, you would type hamilton-d\ugrant in the User name field. 9. In the Password: field, enter your Hamilton Network Password. This is the password you use to access the ESS or SSS server. 10. Place a check in the box labeled Check for updates on connection to network or internet. 11. Quit System Preferences by selecting System Preferences (from the main menu bar), and then Quit System Preferences. What to Expect When You’re Finished 1. After your installation is complete, Sophos will scan for viruses in the background and will automatically remove any that are found. 2. Sophos will update every day automatically via the Internet. Remember that if your computer is not connecting to the Internet Sophos Anti-Virus will not be able to receive up dates, and your virus-protection will be ineffective. 3. We recommend that you repair disk permissions on your computer after the installation is finished, as outlined below. Repairing Disk Permissions 1. In your hard drive, open your Applications folder and then open the Utilities folder. 2. Open Disk Utility. 3. Click on the name of your hard drive in the left section of the window. Under the First Aid tab, click on Repair Disk Permissions. 4. You’ll see a progress bar near the bottom of the window showing the status of the repair. You’ll also see text appear in the blank section of the window as permissions are repaired. Be patient as this process can take several minutes. 5. When finished, you’ll be notified that the Permissions repair is complete. 6. Quit Disk Utility.
Sophos Home Edition on Mac OS X 10.4-10.7 for Students Sophos Students Only As Macintosh becomes more popular, it is increasingly a target for an emerging group of viruses and spyware designed specifically for the Mac operating system. It is in the best interests of Mac users to take action now to protect their systems. This document explains how to download and install Sophos’ free Anti-Virus solution for student Mac users. Download Sophos Anti-Virus 1. Visit the Sophos Anti-Virus for Mac Home Edition page on the Sophos website: http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-edition.aspx 2. Click on the Download Now button: 3. When prompted, click the Save File button. 4. Select Desktop as the save location and then click the Save button. Installing Sophos Anti-Virus 1. Double-click the savosx_72_he.dmg file that you just downloaded to the desktop. It will mount and automatically open Sophos Anti-Virus Home Edition OS X 10.4 . 2. Double-click on Sophos Anti-Virus Home Edition.mpkg. 3. When prompted that “This package will run a program to determine if the software can be installed,” click the Continue button. This will check your system for any possible conflicts that would prevent Sophos from installing. 4. If there are no conflicts, the Welcome Screen will appear. Click Continue. 5. At the Software License Agreement screen, click Continue. 6. Click the Agree button. 7. At the Select a Destination screen, click on Macintosh HD (for most, this will be the only option) and then click Continue. 8. At the Sophos Anti-Virus Updates screen, click Continue. 9. At the Standard Install screen, click the Install button to proceed with the installation. 10. When prompted, enter your username and password for your Mac computer. 11. At the Completion screen, take a moment to read through the brief information on how to use Sophos Anti-Virus for Mac Home Edition. Click Continue. 12. At the Installation was Successful screen, click Close. 13. You should now have a black Sophos shield icon in the Menu Bar at the upper right of your screen. How Do I Use Sophos Anti-Virus for Mac Home Edition? Sophos runs in the background and scans files for threats whenever the files are opened. If you want to perform a manual scan of all your files, click the black Sophos shield in the menu bar and select Scan Local Drives.

Web Servers

Web Publishing Using Mac OSX Web Servers OSX 10.6, 10.7, and newer 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.5 1.) From the Menu bar, choose Go 2.) Choose Connect to Server... 3.) To connect to: WWW (the main Hamilton site), on the address line, type in smb://polaris:139/hamilton then click on Connect. Academics (academics.hamilton.edu), on the address line, type in smb://polaris:139/Academics then click on Connect. Students (students.hamilton.edu), on the address line, type in smb://polaris:139/Students then click on Connect. 4a.) An Authentication window will appear. Hamilton employees, enter Hamilton-d\username for the Name Hamilton students, enter Hamilton-s\username for the Name 4b.) Enter your network Password, then click Connect to connect. OSX 10.4 OSX 10.4 users cannot connect to polaris using the standard on-campus methods. Please follow the instructions for FTP.

Wireless

ITS & IC Lab Printer Installation for Mac OS X 10.5x-10.8.x Wireless For Personal Computers Back to Print Management in Public Labs Installing the Printer Installing the PaperCut Client Using the PaperCut Client NOTE: These instructions are for Macs running OS X 10.5.x – 10.7.x. To verify that you are running Mac OS X 10.5.x – 10.7.x, click on the Apple menu in the upper-left corner of your screen and select About This Mac. In the window that appears the Version listed should be 10.5.x – 10.7.x. If it is 10.3 or 10.4, please refer to the appropriate documentation for your version. screenshots If your computer is running 10.5.x – 10.7.x close the About This Mac window and proceed as follows: Installing the Printer On your Mac, click on the Apple Menu and open System Preferences. screenshot In System Preferences click on Print & Fax. screenshot In the Printing tab, click on the little plus sign ( ) in the left of the window. If the little plus sign is grayed out, click the lock icon below to authenticate and login to the system. screenshot The Add Printer window will open. Right-click (or control click) next to one of the icons on the toolbar. This will bring up a window with a list of available icons you can add to your toolbar. Drag the Advanced button on to the toolbar and click Done. screenshot Select the Advanced icon you just dragged to the toolbar and configure the following: Type: Windows Device: Another device URL: smb://hamilton-s/username:password@printx/printername username = Your Hamilton network username password = Your Hamilton network password printername = Enter the appropriate name of the printer Name: Use same name as entered above for printername. screenshot Print Using: In the drop-down menu choose Select Printer Software and select the appropriate model (the print model name can be found on a white paper labeled on every printer underneath the printer name - e.g. LaserJet 4350). Click OK and then click Add. screenshot You will now be prompted to select the Installable Options for the printer. Please see the white label on the printer for the applicable configurations. Configure the options that are available on the printer and click Continue. In the example to the right, the printer was equipped with a Duplex Unit. Your printer may not have the same options and you should adjust the settings accordingly. screenshot The printer will be added and appear in your list of printers. It will also be set as the default printer. If you would like another printer to be the default printer, select its name in the drop-down list next to Default Printer in Print Dialog. If you are finished configuring printers, close the Print & Fax window. screenshot Back to Top Installing the PaperCut Client To install the PaperCut Client on your personal computer, the following system requirements must be met: Apple Mac OS X 10.3 or higher (PowerPC and Intel both supported) 128 MB or greater RAM Hard Disk – 70 MB – full local installation The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. screenshot Enter your network username and password. NOTE: Include hamilton-s as part of your user name (example: Hamilton-s\student1 ). Click on Connect. screenshot Click on SW Depot. Click on OK. screenshot Click on the PaperCut folder. Double-click on the PaperCut Mac Installer. screenshot In the window that appears, enter your network username and password. Click Connect. screenshot Click on Yes to install the PaperCut Client into your applications folder. screenshot Enter your network username and password. Click OK. screenshot You’ll see a variety of icons on your desktop and in your Dock. Restart your computer to complete the installation. screenshot From the Apple Menu, select System Preferences. Click on Accounts. screenshot Click on Login Items. screenshot Click on the . screenshot Navigate to Applications then PCClient. Click Add. screenshot Close the Accounts Window. You are ready to print. screenshot Back to Top Using the PaperCut Client Open the application from which you need to print. From the File menu, select Print. Chose the printer to which you want to print. NOTE: For 10.5.8 OS X users, you will see the screenshot below. Please enter your local credentials and check Remember this password in my keychain. Click OK. screenshot You’ll see the “cost” of your print job. Click on Print. screenshot At any time, you can see how much you’ve printed by clicking on the PCClient icon in the Dock. screenshot If you want to see more details, click on Details… screenshot Enter your network username and password. Click on Login. In addition to seeing the number of pages you’ve printed, you’ll also see your environmental impact. screenshot Back to Top
Print Driver Installation for Mac OS X 10.4.x-10.8.x Wireless For Personal Computers NOTE: These instructions must be followed before proceeding to install the printer and Papercut Client. The installer is located on the Software server. Click on Go and then Connect to Server. Enter software for the Server Address. Click on Connect. Enter your network username and password. Click on Connect. Click on SW Depot. Click on OK. Click on the HP P4010 Series -Mac folder. Double-click on the HP_LJP4010_P4510Series_CD1.dmg In the window that appears, click Open. In the next window that appears, double-click the printer icon. Click Continue. In the next window, be sure to Agree to the terms of the software license agreement. Select the Macintosh HD drive and click Continue. This will prompt you to enter your Macintosh credentials. Click OK. You have successfully installed the print driver and can now follow the documentation for installing the printer and PaperCut Client located here: https://my.hamilton.edu/information-technology-services/resource-center/its-ic-lab-printer-installation-for-mac-os-x-10-5x-10-7-x
Secure Wireless - Mac OS 10.5 & 10.6 Wireless For Macintosh Laptops Only NOTE: If you are not on the Hamilton campus please go through the step-by-step instructions until you come to the stop sign. Then when you arrive on campus you can complete the last few step to connect to our secure wireless network. If you are on campus please proceed through all the instructions in the document. Configuration System Preferences Click on the Apple menu icon in the upper-left corner of the screen and open System Preferences. Click on the Network icon near the middle of the window. Click on the button in the lower left of the screen and click on Set Service Order. Click and drag AirPort to the top of the Service Order list. Click OK and then Apply. In the left column, click on Airport. Click on Advanced. Select 802.1x in the menu row. Click on the button in the bottom left corner and click Add User Profile to create a new profile. Name the profile Hamilton Secure. In the box labeled User Name: type your network ID (this is the same as your e-mail name (without @hamilton.edu). In the box labeled Password: type in your network password (this is usually the same as your e-mail password). In the box labeled Authentication: check the box to enable PEAP and UNCHECK TTLS In the box labeled Wireless Network: type aps-hamilton. In the box labeled Security Type: select WPA2 Enterprise 5. Select TCP/IP in the menu row. For Configure IPv6, select Off. Click OK and then Apply. If AirPort is not already on, click the Turn AirPort On button. Under Location, click on Automatic and select Edit Locations. NOTE: If your preference is locked (see the lock icon in the lower left corner), you must unlock it by clicking on it. The ID and password it requests are those that you enter when your first boot your computer. Click the plus ( )to create a new location and call it Hamilton. Then click Done. Under Location make sure it says Hamilton otherwise click the location and select Hamilton. Click Advanced. IMPORTANT NOTE: When using the location feature you will need to be mindful of your physical location. When you are at Hamilton College please use the location called Hamilton; otherwise, revert back to Automatic when physically off-campus with your laptop. Select Airport in the menu row. Click on the icon to add a new Preferred Network. Type in the Network Name: aps-hamilton. In the option labeled Security: select WPA2 Enterprise. Type in your Hamilton Network user name & password in the appropriate fields. This is the user ID and password you use to access your ESS or SSS folders. It is often the same as your e-mail ID and password. Select Hamilton Secure in 802.1x. Click Add. If you have more than one network listed in your Preferred Networks, click and drag aps-hamilton to the top of the Preferred Networks list. Click OK. Click Apply. Close System Preferences. NOTE: If you are pre-configuring your laptop at home for the Hamilton wireless network please stop here, otherwise you can continue to step 13. When you arrive on campus turn on your computer and it will automatically attempt to connect to aps-hamilton (provided Airport is on). You should then be prompted to verify the security certificate for our secure network as shown below (starting with step 13). In the event you cannot connect to our wireless network while on campus, please contact the Help Desk for assistance at 315-859-4181. If you are on campus, you should see a prompt to verify your Certificate. Please click on Show Certificate. Check Always trust “acs-07.hamilton.edu”. Click Continue. Type your computer password if/when prompted. This is the password you normally enter when you first boot your computer. You are now connected to the secure wireless network.

Mac OS 10.5 Leopard

Available Resources