4CE53030-CF0C-67E7-7D845E0B5CDEC0DD
2AE8E152-CD9B-4C75-4E16F5CDA0BE0F8C

We encourage you to contact us with any questions or concerns.

Burke Library - 3rd Floor
helpdesk@hamilton.edu

859-4181
859-4185 - fax

Secure Wireless Setup - Windows 7

For Personal Computers

  1. To begin, left-click on the Wireless icon in the taskbar.

  1. Select Open Network and Sharing Center in the menu that pops up.

  1. In the Network and Sharing Center, select Set up a new connection or network.

  1. Select Manually Connect to a wireless network in the window that appears.

  1. In the screen that appears, type aps-hamilton in the Network Name field and select WPA2-Enterprise and AES from the pull-down menus. When finished, left-click the Next button.

  1. After you see Successfully added aps-hamilton, left-click Change Connection settings.

  1. Ensure the two checkboxes labeled Connect Automatically when the network is in range and Connect even if the network is not broadcasting its name (SSID) are checked.  Now click on the Security tab.

  1. In the Security tab, check Remember my credentials for this connection each time I’m logged in.

  1. Click Advanced Settings.

  1. Check Specify Authentication Mode.
  2. Select User Authenication in the pull-down menu.
  3. Click OK.
  4. Click on Settings next to “Microsoft: Protected EAP [PEAP]
  5. Make sure “Validate Server Certificate” and “Connect to these servers:” are checked and type “acs-07.hamilton.edu” in the field below. 
  6. Thereafter, scroll down the list and check “GeoTrust Global CA” and "GoDaddy Class 2 Certification Authority." Finish by clicking Configure next to “Secured password [EAP-MSCHAP v2]”Uncheck “Automatically use my Windows logon name and password…” and click OK.

  1. Click OK.
  2. Also click OK in all remaining dialogue boxes.

NOTE: If you are pre-configuring your laptop at home to prepare it for the Hamilton wireless network please stop here, otherwise you can continue to step 18.  When you arrive on campus, your laptop should automatically attempt to connect to aps-hamilton.  When it finds our network you will be prompted to log in using your Hamilton ID and your password as shown in steps 18-21 below.  In the event you cannot connect to our wireless network while on campus, please contact the Help Desk for assistance at 315-859-4181.

 

  1. You should notice a popup balloon in the lower-right hand corner that says “Additional information is required to connect to aps-hamilton.”  Left-click on this balloon

  1. If you are a student, please enter “HAMILTON-S\username” (replace "username" with your Hamilton username)  in the first field and your password in the second.

  

 

 

  1. Left-click on OK when finished.
  2. You should now be connected to the internet.

Comments

No comments yet.

Cupola